描述:
Dedicated Interface Kits for TFT Displays This range of interface kits are designed for use with a specific Optrex, Mitsubish or NLT industrial display. Each display interface kit features an interface card that is pre-configured to work with a partner high brightness TFT panel (the displays for use with each kit are shown in the table). Kit contents 注 Requires: +12V / 3.5A DC Single Power, 42W AC/DC power adapter (not supplied). 附件
描述:
Dedicated Interface Kits for TFT Displays This range of interface kits are designed for use with a specific Optrex, Mitsubish or NLT industrial display. Each display interface kit features an interface card that is pre-configured to work with a partner high brightness TFT panel (the displays for use with each kit are shown in the table). Interfaces with TFT graphic displays Analog RGB (VGA input), DVI and Audio supported Multi-sync capability up to WSXGA resolution @ 75Hz compatible standard DOS, VGA, SVGA, XGA, WXGA, UXGA and WUXGA VESA timing Full control of all relevant display and interface parameters via OSD Signal Power Level selection by Jumper Switch on the PCB: 3.3V, 5V, 12V Compact Dimensions: 110 x 120 x 14mm Operating temperature range: 0 to 50°C ### Kit contents Pre-configured Interface board OSD control board LED backlight driver board Linking cables **Suitable Displays** | | | | ---|---|---|---|--- **Interface Kits** | **Optrex Display Part No.** | **Optrex Display Stock No.** | **Mitsubishi Display Part No.** | **Mitsubishi Display Stock No.** Galaxy 4 Kit for 8.4 XGA | T-55549D084J-LW-A-AAN | 726-9127 | AA084XB01 | 769-2794 Galaxy 4 Kit for 10.4 SVGA | T-55563D104J-LW-A-ABN | 726-9120 | AA104SH12 | 769-2798 Galaxy 4 Kit for 10.4 XGA | T-55533D104J-LW-A-ABN | 726-9124 | AA104XD12 | 769-2808 Galaxy 4 Kit for 12.1 XGA | T-55566D121J-LW-A-AAN | 726-9133 | AA121XN11 | 769-2801 Galaxy 4 Kit for 15.1 XGA | T-55534D150J-LW-A-ABN | 726-9136 | AA150XT11 | 769-2805 ### 注 Requires: +12V / 3.5A DC Single Power, 42W AC/DC power adapter (not supplied). ### 附件
描述:
Dedicated Interface Kits for TFT Displays This range of interface kits are designed for use with a specific Optrex, Mitsubish or NLT industrial display. Each display interface kit features an interface card that is pre-configured to work with a partner high brightness TFT panel (the displays for use with each kit are shown in the table). Kit contents 注 Requires: +12V / 3.5A DC Single Power, 42W AC/DC power adapter (not supplied). 附件
描述:
Dedicated Interface Kits for TFT Displays This range of interface kits are designed for use with a specific Optrex, Mitsubish or NLT industrial display. Each display interface kit features an interface card that is pre-configured to work with a partner high brightness TFT panel (the displays for use with each kit are shown in the table). Kit contents 注 Requires: +12V / 3.5A DC Single Power, 42W AC/DC power adapter (not supplied). 附件
