描述:
90° 外螺纹/内螺纹 弯头 90ﾟ 外螺纹 x 内螺纹 ### Threaded Fitting - Bronze Bronze is an exceptionally stable material that can be worked with high degrees of precision. It is corrosion resistant against potable and sea water. These fittings are designed to comply, as appropriate, with the dimensional and operational requirements of BS143 and DIN2950 (body design), BS1400: LG2C and DIN 1705 (material) and BS21 and ISO 7 (male and parallel female threads).
描述:
Conex x Conex ### Fittings - Brass Straights and End Stops ### Fittings - Brass Straights & End Stops High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories Suitable for connecting copper tubes in accordance with BS2871 part 1 These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many types of plastic pipes with size compatible outside diameters The compression fitting range is manufactured in accordance with BS864 part 2 Working temperatures/pressures listed in the Key Characteristics table are based on BS864 Part 2. The table also indicates gases and fluids suitable for this range of fittings Key Characteristics --- **Medium** | **Tube Size** | **Max. Temp. (°C)** | **max. working pressure (bar)** Potable water Light mineral oils | 8 & 10mm | 30 | 70 | | 90 | 40 | | 120 | 25 | 12 to 28mm | 30 | 20 | | 90 | 10 | | 120 | 7 LPG natural gases | 8 & 10mm | 30 | 4.5 | 12 to 28mm | 30 | 1 Compressed air | 8 to 28mm | 30 | 7 It should be noted that the maximum working pressures listed in the Key Characteristics table assume an adverse tensile load is not placed upon the joints.
描述:
Conex x BSP 平行外螺纹 ### Fittings - Brass Straights and End Stops ### Fittings - Brass Straights & End Stops High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories Suitable for connecting copper tubes in accordance with BS2871 part 1 These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many types of plastic pipes with size compatible outside diameters The compression fitting range is manufactured in accordance with BS864 part 2 Working temperatures/pressures listed in the Key Characteristics table are based on BS864 Part 2. The table also indicates gases and fluids suitable for this range of fittings Key Characteristics --- **Medium** | **Tube Size** | **Max. Temp. (°C)** | **max. working pressure (bar)** Potable water Light mineral oils | 8 & 10mm | 30 | 70 | | 90 | 40 | | 120 | 25 | 12 to 28mm | 30 | 20 | | 90 | 10 | | 120 | 7 LPG natural gases | 8 & 10mm | 30 | 4.5 | 12 to 28mm | 30 | 1 Compressed air | 8 to 28mm | 30 | 7 It should be noted that the maximum working pressures listed in the Key Characteristics table assume an adverse tensile load is not placed upon the joints.
描述:
Nuts Olives etc_Compression Fittings Conex ### Nuts, Olives, Reducers, Bushes, Plugs & Seals High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories Suitable for connecting copper tubes in accordance with BS2871 part 1 These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many types of plastic pipes with size compatible outside diameters The compression fitting range is manufactured in accordance with BS864 part 2 Working temperatures/pressures listed in the Key Characteristics table are based on BS864 Part 2. The table also indicates gases and fluids suitable for this range of fittings Key Characteristics --- **Medium** | **tube size** | **max. temp. °C** | **max. working pressure bar ** Potable water Light mineral oils | | 30 | 70 | 8 & 10mm | 90 | 40 | | 120 | 25 | | 30 | 20 | 12 to 28mm | 90 | 10 | | 120 | 7 LPG natural gases | 8 & 10mm | 30 | 4.5 | 12 to 28mm | 30 | 1 Compressed air | 8 to 28mm | 30 | 7 The maximum working pressures assume an adverse tensile load is not placed upon the joints.
描述:
Conex x Conex ### Fittings - Brass Straights and End Stops ### Fittings - Brass Straights & End Stops High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories Suitable for connecting copper tubes in accordance with BS2871 part 1 These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many types of plastic pipes with size compatible outside diameters The compression fitting range is manufactured in accordance with BS864 part 2 Working temperatures/pressures listed in the Key Characteristics table are based on BS864 Part 2. The table also indicates gases and fluids suitable for this range of fittings Key Characteristics --- **Medium** | **Tube Size** | **Max. Temp. (°C)** | **max. working pressure (bar)** Potable water Light mineral oils | 8 & 10mm | 30 | 70 | | 90 | 40 | | 120 | 25 | 12 to 28mm | 30 | 20 | | 90 | 10 | | 120 | 7 LPG natural gases | 8 & 10mm | 30 | 4.5 | 12 to 28mm | 30 | 1 Compressed air | 8 to 28mm | 30 | 7 It should be noted that the maximum working pressures listed in the Key Characteristics table assume an adverse tensile load is not placed upon the joints.
描述:
BSP 平行螺纹适配器，用于延长水龙头 提供两种尺寸：1/2" 和 3/4 随附密封垫圈 ### Nuts Olives etc_Compression Fittings Conex ### Nuts, Olives, Reducers, Bushes, Plugs & Seals High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories Suitable for connecting copper tubes in accordance with BS2871 part 1 These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many types of plastic pipes with size compatible outside diameters The compression fitting range is manufactured in accordance with BS864 part 2 Working temperatures/pressures listed in the Key Characteristics table are based on BS864 Part 2. The table also indicates gases and fluids suitable for this range of fittings Key Characteristics --- **Medium** | **tube size** | **max. temp. °C** | **max. working pressure bar ** Potable water Light mineral oils | | 30 | 70 | 8 & 10mm | 90 | 40 | | 120 | 25 | | 30 | 20 | 12 to 28mm | 90 | 10 | | 120 | 7 LPG natural gases | 8 & 10mm | 30 | 4.5 | 12 to 28mm | 30 | 1 Compressed air | 8 to 28mm | 30 | 7 The maximum working pressures assume an adverse tensile load is not placed upon the joints.
描述:
等径弯头90° 内螺纹/内螺纹 ### Threaded Fitting - Bronze Bronze is an exceptionally stable material that can be worked with high degrees of precision. It is corrosion resistant against potable and sea water. These fittings are designed to comply, as appropriate, with the dimensional and operational requirements of BS143 and DIN2950 (body design), BS1400: LG2C and DIN 1705 (material) and BS21 and ISO 7 (male and parallel female threads).
描述:
Threaded Fitting - Bronze Bronze is an exceptionally stable material that can be worked with high degrees of precision. It is corrosion resistant against potable and sea water. These fittings are designed to comply, as appropriate, with the dimensional and operational requirements of BS143 and DIN2950 (body design), BS1400: LG2C and DIN 1705 (material) and BS21 and ISO 7 (male and parallel female threads).
描述:
Conex 3000 系列是红色黄铜螺纹配件。 配件制造符合 EN 1254（延展性铁配件的制造标准），配件螺纹符合 ISO 7 ### Threaded Fitting - Bronze Bronze is an exceptionally stable material that can be worked with high degrees of precision. It is corrosion resistant against potable and sea water. These fittings are designed to comply, as appropriate, with the dimensional and operational requirements of BS143 and DIN2950 (body design), BS1400: LG2C and DIN 1705 (material) and BS21 and ISO 7 (male and parallel female threads).
描述:
Conex x BSP 平行外螺纹 ### Fittings - Brass Straights and End Stops ### Fittings - Brass Straights & End Stops High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories Suitable for connecting copper tubes in accordance with BS2871 part 1 These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many types of plastic pipes with size compatible outside diameters The compression fitting range is manufactured in accordance with BS864 part 2 Working temperatures/pressures listed in the Key Characteristics table are based on BS864 Part 2. The table also indicates gases and fluids suitable for this range of fittings Key Characteristics --- **Medium** | **Tube Size** | **Max. Temp. (°C)** | **max. working pressure (bar)** Potable water Light mineral oils | 8 & 10mm | 30 | 70 | | 90 | 40 | | 120 | 25 | 12 to 28mm | 30 | 20 | | 90 | 10 | | 120 | 7 LPG natural gases | 8 & 10mm | 30 | 4.5 | 12 to 28mm | 30 | 1 Compressed air | 8 to 28mm | 30 | 7 It should be noted that the maximum working pressures listed in the Key Characteristics table assume an adverse tensile load is not placed upon the joints.
描述:
Threaded Fitting - Bronze Bronze is an exceptionally stable material that can be worked with high degrees of precision. It is corrosion resistant against potable and sea water. These fittings are designed to comply, as appropriate, with the dimensional and operational requirements of BS143 and DIN2950 (body design), BS1400: LG2C and DIN 1705 (material) and BS21 and ISO 7 (male and parallel female threads).
描述:
Threaded Fitting - Bronze Bronze is an exceptionally stable material that can be worked with high degrees of precision. It is corrosion resistant against potable and sea water. These fittings are designed to comply, as appropriate, with the dimensional and operational requirements of BS143 and DIN2950 (body design), BS1400: LG2C and DIN 1705 (material) and BS21 and ISO 7 (male and parallel female threads).
描述:
Conex x BSP 平行外螺纹 Fittings - Brass Straights and End Stops Fittings - Brass Straights & End Stops High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories Suitable for connecting copper tubes in accordance with BS2871 part 1 These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many types of plastic pipes with size compatible outside diameters The compression fitting range is manufactured in accordance with BS864 part 2 Working temperatures/pressures listed in the Key Characteristics table are based on BS864 Part 2. The table also indicates gases and fluids suitable for this range of fittings
描述:
BS21 Nuts Olives etc_Compression Fittings Conex Nuts, Olives, Reducers, Bushes, Plugs & Seals High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories Suitable for connecting copper tubes in accordance with BS2871 part 1 These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many types of plastic pipes with size compatible outside diameters The compression fitting range is manufactured in accordance with BS864 part 2 Working temperatures/pressures listed in the Key Characteristics table are based on BS864 Part 2. The table also indicates gases and fluids suitable for this range of fittings
描述:
Nuts Olives etc_Compression Fittings Conex Nuts, Olives, Reducers, Bushes, Plugs & Seals High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories Suitable for connecting copper tubes in accordance with BS2871 part 1 These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many types of plastic pipes with size compatible outside diameters The compression fitting range is manufactured in accordance with BS864 part 2 Working temperatures/pressures listed in the Key Characteristics table are based on BS864 Part 2. The table also indicates gases and fluids suitable for this range of fittings
描述:
Threaded Fitting - Bronze Bronze is an exceptionally stable material that can be worked with high degrees of precision. It is corrosion resistant against potable and sea water. These fittings are designed to comply, as appropriate, with the dimensional and operational requirements of BS143 and DIN2950 (body design), BS1400: LG2C and DIN 1705 (material) and BS21 and ISO 7 (male and parallel female threads).
描述:
Threaded Fitting - Bronze Bronze is an exceptionally stable material that can be worked with high degrees of precision. It is corrosion resistant against potable and sea water. These fittings are designed to comply, as appropriate, with the dimensional and operational requirements of BS143 and DIN2950 (body design), BS1400: LG2C and DIN 1705 (material) and BS21 and ISO 7 (male and parallel female threads).
描述:
90° 内螺纹/内螺纹 ### Threaded Fitting - Bronze Bronze is an exceptionally stable material that can be worked with high degrees of precision. It is corrosion resistant against potable and sea water. These fittings are designed to comply, as appropriate, with the dimensional and operational requirements of BS143 and DIN2950 (body design), BS1400: LG2C and DIN 1705 (material) and BS21 and ISO 7 (male and parallel female threads).
描述:
BS21 ### Nuts Olives etc_Compression Fittings Conex ### Nuts, Olives, Reducers, Bushes, Plugs & Seals High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories Suitable for connecting copper tubes in accordance with BS2871 part 1 These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many types of plastic pipes with size compatible outside diameters The compression fitting range is manufactured in accordance with BS864 part 2 Working temperatures/pressures listed in the Key Characteristics table are based on BS864 Part 2. The table also indicates gases and fluids suitable for this range of fittings Key Characteristics --- **Medium** | **tube size** | **max. temp. °C** | **max. working pressure bar ** Potable water Light mineral oils | | 30 | 70 | 8 & 10mm | 90 | 40 | | 120 | 25 | | 30 | 20 | 12 to 28mm | 90 | 10 | | 120 | 7 LPG natural gases | 8 & 10mm | 30 | 4.5 | 12 to 28mm | 30 | 1 Compressed air | 8 to 28mm | 30 | 7 The maximum working pressures assume an adverse tensile load is not placed upon the joints.
描述:
Threaded Fitting - Bronze Bronze is an exceptionally stable material that can be worked with high degrees of precision. It is corrosion resistant against potable and sea water. These fittings are designed to comply, as appropriate, with the dimensional and operational requirements of BS143 and DIN2950 (body design), BS1400: LG2C and DIN 1705 (material) and BS21 and ISO 7 (male and parallel female threads).
